Bob Panich Consultancy
PO Box 360
Ryde NSW 1680
Australia
Phone: (61 2) 9809-6499
Fax: (61 2) 9809-6962
www.bobpanich.com.au/
Models
- BPC
Figure B-9. Panich BPC
Figure B-10. Driver unit for Panich BPC
Standard features
WALK indication
- Tone — 500 Hz with a repetition rate of 8.5 Hz — series of rapid thump sounds
- Vibrating arrow
Other
- Pushbutton locator tone (locating tone) — 880 Hz with a repetition rate of 1 Hz for US market or 1000 Hz with a repetition rate of 0.55 Hz for Australian market
- Tactile arrow
- Automatic volume adjustment, with three standard settings for response
- Alert tone (transitional tone) — brief burst of 3500 Hz tone, decreasing exponentially to 700 Hz, and then going to 500 Hz WALK tone
Optional features
- Cuckoo and chirp or other sounds
- Fixed WALK message length of 8, 16 or 32 seconds or WALK message can be on during the full WALK interval
- Actuation indicator (demand indicator/demand tone) — light and tone
- Long button press — allows pedestrians to request a WALK tone at 12 dB above the sound of the locator tone (Higher volume demand, HVD)
Installation notes
Driver unit is mounted in a housing on the pole near the pedhead, wired to the pedhead.
Automatic gain control level is set during installation.
Comments
Complies with specifications of the Australian standard; standard pushbutton in Australia.